fix: revert TUNNEL_LOCAL_SSH_PORT to 2223, fix registry, add incident docs

- wizard.sh + connect.conf: TUNNEL_LOCAL_SSH_PORT back to 2223 (Synology SSH port) - port-registry: renamed x6340 → x4662 (matches QuickConnect ID) - port-registry: added MR2200ac mesh satellite note for x4662 - deployment checklist: added kit-connect section, post-deployment rules, incident log, and complete fleet port registry table - memory: added fleet-router-inventory.md with full fleet state - hub README: updated with current status and locations Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-22 21:20:08 +00:00
parent 44566d9563
commit 24d8fbd366
178 changed files with 874 additions and 15 deletions
@@ -0,0 +1,125 @@
+FIXTURES="$BATS_TEST_DIRNAME/../fixtures"
+
+LIBDIR="$(cd "$BATS_TEST_DIRNAME/../.."/package/kit-busrouter/files/usr/lib/busrouter && pwd)"
+
+setup() {
+    export LIB_DIR="$LIBDIR"
+    load '../../package/kit-busrouter/files/usr/lib/busrouter/lib-decide.sh'
+    load '../../package/kit-busrouter/files/usr/lib/busrouter/modem-sim.sh'
+}
+
+@test "modem_signal ubus parse: rsrp=-96 rsrq=-10 sinr=13" {
+    run _modem_parse_ubus < "$FIXTURES/modem-signal-ubus.json"
+    [ "$status" -eq 0 ]
+    rsrp=$(echo "$output" | awk '{print $1}')
+    rsrq=$(echo "$output" | awk '{print $2}')
+    sinr=$(echo "$output" | awk '{print $3}')
+    [ "$rsrp" -eq -96 ]
+    [ "$rsrq" -eq -10 ]
+    [ "$sinr" -eq 13 ]
+}
+
+@test "modem_signal AT parse: rsrp=-97 rsrq=-10 sinr=14 (rsrp rsrq sinr order)" {
+    run _modem_parse_at < "$FIXTURES/modem-signal-at.txt"
+    [ "$status" -eq 0 ]
+    rsrp=$(echo "$output" | awk '{print $1}')
+    rsrq=$(echo "$output" | awk '{print $2}')
+    sinr=$(echo "$output" | awk '{print $3}')
+    [ "$rsrp" -eq -97 ]
+    [ "$rsrq" -eq -10 ]
+    [ "$sinr" -eq 14 ]
+}
+
+@test "modem_signal ubus parse: empty input exits 1" {
+    run _modem_parse_ubus < /dev/null
+    [ "$status" -ne 0 ]
+    [ -z "$output" ]
+}
+
+@test "modem_signal AT parse: empty input exits 1" {
+    run _modem_parse_at < /dev/null
+    [ "$status" -ne 0 ]
+    [ -z "$output" ]
+}
+
+@test "modem_sim_switch: rejects invalid slot" {
+    export MODEM_AT_CMD=/bin/true MODEM_BUS=1-1.2
+    run modem_sim_switch 3
+    [ "$status" -eq 1 ]
+}
+
+@test "modem_sim_switch: accepts slot 1" {
+    # Stub gl_modem to emit 'OK' and stub ifdown/ifup
+    mkdir -p "$BATS_TMPDIR/stub"
+    printf '#!/bin/sh
+echo OK
+' > "$BATS_TMPDIR/stub/gl_modem"
+    printf '#!/bin/sh
+exit 0
+' > "$BATS_TMPDIR/stub/ifdown"
+    printf '#!/bin/sh
+exit 0
+' > "$BATS_TMPDIR/stub/ifup"
+    chmod +x "$BATS_TMPDIR/stub/gl_modem" "$BATS_TMPDIR/stub/ifdown" "$BATS_TMPDIR/stub/ifup"
+    export PATH="$BATS_TMPDIR/stub:$PATH"
+    export MODEM_AT_CMD=gl_modem MODEM_BUS=1-1.2
+    run modem_sim_switch 1
+    [ "$status" -eq 0 ]
+}
+
+# --- Task 4.2: SIM auto-switch ---
+
+_sim_make_stub() {
+    mkdir -p "$BATS_TMPDIR/sim_stub"
+    printf '#!/bin/sh
+case "$*" in *QUIMSLOT\?*) echo "+QUIMSLOT: 1"; echo "OK" ;; *QUIMSLOT=*) echo "OK" ;; *) echo "OK" ;; esac
+' > "$BATS_TMPDIR/sim_stub/gl_modem"
+    printf '#!/bin/sh
+exit 0
+' > "$BATS_TMPDIR/sim_stub/ifdown"
+    printf '#!/bin/sh
+exit 0
+' > "$BATS_TMPDIR/sim_stub/ifup"
+    chmod +x "$BATS_TMPDIR/sim_stub/gl_modem" "$BATS_TMPDIR/sim_stub/ifdown" "$BATS_TMPDIR/sim_stub/ifup"
+    export PATH="$BATS_TMPDIR/sim_stub:$PATH"
+    export MODEM_AT_CMD=gl_modem MODEM_BUS=1-1.2
+    export SIM_STATE_DIR="$BATS_TMPDIR/simstate"
+    export SIM_SWITCH_RSRP=-80  # threshold above actual -99 bench value -> easy to trigger
+    export SIM_SWITCH_CYCLES=3
+    export SIM_SWITCH_COOLDOWN=3600
+    rm -rf "$BATS_TMPDIR/simstate"
+    mkdir -p "$BATS_TMPDIR/simstate"
+}
+
+@test "sim_check: good signal resets counter and does not switch" {
+    _sim_make_stub
+    # First call with bad signal to set counter to 1
+    sim_check_and_switch -90 || true
+    bad=$(cat "$SIM_STATE_DIR/sim_bad_cycles" 2>/dev/null || echo 0)
+    [ "$bad" -eq 1 ]
+    # Now good signal resets
+    sim_check_and_switch -70 || true
+    bad=$(cat "$SIM_STATE_DIR/sim_bad_cycles" 2>/dev/null || echo 0)
+    [ "$bad" -eq 0 ]
+}
+
+@test "sim_check: triggers switch after SIM_SWITCH_CYCLES bad cycles" {
+    _sim_make_stub
+    # 2 bad cycles -> no switch yet
+    sim_check_and_switch -90 || true
+    sim_check_and_switch -90 || true
+    [ ! -f "$SIM_STATE_DIR/sim_last_switch" ]
+    # 3rd bad cycle -> switch triggered
+    run sim_check_and_switch -90
+    [ "$status" -eq 0 ]
+    [ -f "$SIM_STATE_DIR/sim_last_switch" ]
+}
+
+@test "sim_check: cooldown prevents switch within SIM_SWITCH_COOLDOWN" {
+    _sim_make_stub
+    export SIM_SWITCH_COOLDOWN=3600
+    # Pre-seed a recent switch time
+    date +%s > "$SIM_STATE_DIR/sim_last_switch"
+    run sim_check_and_switch -90
+    [ "$status" -eq 1 ]  # blocked by cooldown
+}