fix: null gateway latency; skip aiwanbal generic modem_type for carrier detection

- Gateway ping latency is LAN RTT (<1ms), not WAN latency; set to null so dashboards don't show misleading sub-ms values for Eyeride-NAT'd interfaces - aiwanbal reports modem_type=generic for wired ISP ports; treat same as none so carrier detection falls through to gateway IP pattern matching (AT&T etc.) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
fix: ping local gateway instead of curl when ICMP gives 100% loss
2026-07-23 03:48:32 +00:00 · 2026-07-23 03:38:03 +00:00 · 2026-07-23 03:31:47 +00:00 · 2026-07-23 03:29:10 +00:00 · 2026-07-23 03:26:04 +00:00 · 2026-07-23 03:06:08 +00:00
185 changed files with 1671 additions and 270 deletions
@@ -0,0 +1 @@
+{"sessionId":"a109bdc4-2fd1-49a3-803f-c3c3b4858c99","pid":3141099,"procStart":"375768368","acquiredAt":1784001797642}
@@ -0,0 +1,2 @@
+x¥’_OÛ0Å÷œOq±˜(ÚÒ$‚í�)h
+R¥2¡6ÛBVÚÜ.V�8³
@@ -0,0 +1,3 @@
+x�‘ËnÛ@E»ÖWÜE6”ÚÖkd9mQ7)Q�ÂÚó "ÁÒŒª!ñßwMÖåŽä½Ä!)Í0tY}p$ã‰Š“8IÑÈ‚1Ê¡R’‘o™mrÁ‹¦Éƒ‘O¤ØÖw“DåÉF0•SœJÆ”Ü²´ˆYá
+‰hD¢XÀg×š	û¾'�R>´\ã3¿dßNtî;}êÜJšá+¢|i¶IS„�¯zFGÿçÄl'3{û·'d«(ÌV1žŽá¨§�ÜtÆÓáXá¥s-ÄÜ44§K9>½iV¶Ýáy´uÓ½b±¯Âß~ÈãáîK¼¼ySÕÒø½¤ÃâçñðÖqGhºžìò&À;Ýh¬[×M?Ûvý�£¶¤Õ•Cu÷
+£ÑÎÊ¼h×
@@ -0,0 +1,2 @@
+x²▌1nц0E;Кэ"-≥TQИ■)[/@K4bь√WzШ:WхъчПС╤╝S
+Ьжv3И)▄Х┴╓0&
@@ -0,0 +1,2 @@
+x�Ž;nÃ0D]óÛ0(rù3ŒÀ©R¥óVË%,H¢…)|{3WÈtóðÞÖuj`p8µC’uEbò)S±â9C]ô±ƒµAµÓ!µA.˜\²Áø<æ"zt–K×3
+f¶F�LzPôÛžÛŸË"¾ùëInô×î³¼–©ÎS»ð¶~À¢I¼�pÖ=ªÓþ±ÉÿÖj_¨^a¥c†ýÌ/äŠzÑ#LŠ
@@ -0,0 +1,3 @@
+x}�;‚0…�ù¤³1�ª$nº¸øJ`7
+4bÛ´÷ÆÃ·a±CÓœó�ûhÞª<¤kºøaHJa›#‡ %»Ð‹NV¹ƒ%½59Î«ë�ë�á¥ËE«hÙGP 1\Bûžk-ï‘n I©^²ò‘5FaÝh„ƒö�ÆZõ_+}²>1à²xŸça…Àj>îäch½@.×{ºÏR2Žl�ÈÄ“»ÇS_|!'›˜ÒdMg
+”h˜ÿÒhØÊÝ]Ð_ùc
@@ -0,0 +1,3 @@
+xťŹÁNä0†÷Ü§řOhŃ2¨iÚÎĐ
+¸ěi/\Ń’ÔŮF“¦Uś€F�w'x|ňoű·?›ež]BW÷?R$ÂĐ!¬>ŘFŽ]×R'{Ó´µPÝa¬{MOµäP*RH�{a„´¶¤ŃŇĘ�úAěűZ7µmmßÚşé›ao*•Ó´DÜyOÍźIÜ¨wu{¤“wáčŇĄYćßűC3´ť~Ő%ŞR-Ś‰ľç®tć¸äbżB"O3Ąxşä	Ć“
+yeěŔĘ8©D;ë<!’ůš‚™đDŃYGcUíđ@«W†đ˛Ť\ă7ŘĎ.MxÄÎ~Č8;ŰFľúiçuŤÄ\<‘÷xV1¸đź±ĚŽąäŰĆOU(�RH×?uXźÎÍý;ß¬r>G‚ÎÖRd”[Łăă¬ĎeĂHŢ•*ŚŰÓ%-§¬aĘ1Toq§n
@@ -0,0 +1 @@
+x�ŽAjÃ0E»Ö)f0òH²¬RB�®ºëÆ£llËÁQ¹}Ü+ôo>ïÃƒÏÛºN0Ø�º‹€%õCÌ:8�ÙEQç]VßöQØ¶ˆÒ%ÅÁYs§]J…¾sž¬Ud
@@ -0,0 +1,4 @@
+x�ŽAjÃ0E»Ö)fÒXòH!”
+]e×ŒFcblËÁQ¹}Ý+äo>ïÃƒ/ë²Œ
+0Ø�¶©BJ¢¡d‹ÒGÒeè˜óà|Á�œV
+±ÅÜyÓÚ€„<†0ÆÜÇÎ«Æ‚=e$0u„ÒÙèÊ`øÙnë—yÖ
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
kitadmin	30953399b6	fix: null gateway latency; skip aiwanbal generic modem_type for carrier detection - Gateway ping latency is LAN RTT (<1ms), not WAN latency; set to null so dashboards don't show misleading sub-ms values for Eyeride-NAT'd interfaces - aiwanbal reports modem_type=generic for wired ISP ports; treat same as none so carrier detection falls through to gateway IP pattern matching (AT&T etc.) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-07-23 03:48:32 +00:00
kitadmin	088c256f58	fix: ping local gateway instead of curl when ICMP gives 100% loss curl --interface fails for root on Synology due to policy routing. Pinging the local gateway (e.g. Eyeride at 192.168.10.1) works reliably and confirms the WAN path is up even when internet ICMP is NAT-blocked. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-07-23 03:38:03 +00:00
kitadmin	bbbc873bdb	fix: HTTP fallback probe when ICMP reports 100% loss (Eyeride NAT blocks ICMP) Eyeride 5G device passes HTTP traffic but drops ICMP, causing false 100% loss. When ping gives 100% loss, try curl --interface to confirm connectivity; if HTTP probe succeeds, correct loss to 0% and derive latency from connect time. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-07-23 03:31:47 +00:00
kitadmin	8f2d6a7cbd	fix: sanitize _mtime with tr to prevent ash arithmetic crash on Synology stat output can include non-numeric chars on some RT2600ac firmware versions, causing 0 to fail. Strip with tr -cd '0-9' before arithmetic. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-07-23 03:29:10 +00:00
kitadmin	a4ba9f8fcd	fix: ash-compatible arithmetic in _cached_speedtest; clean up speedtest null guards Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-07-23 03:26:04 +00:00
kitadmin	8ea704f7e3	fix: use ingest HTTP API instead of direct Postgres for VPS telemetry; cache speedtest results per interface - hub/server.py: replace psycopg2 Postgres connection with urllib HTTP call to ingest /api/devices endpoint (fleet Postgres is Docker-internal, not reachable from the VPS directly) - telemetry-synology.sh: run_speedtest() now writes per-interface cache files (speedtest-result-<iface>); _cached_speedtest() reads cache if < 35 min old; _collect_wan() uses cached result so throughput shows in telemetry without blocking every 1-min cycle Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-07-23 03:06:08 +00:00
kitadmin	8a648dc637	feat: smart WAN role detection, aiwanbal integration, speedtest support - Auto-detect cellular vs fiber/Starlink regardless of physical port: aiwanbal modem_type → Eyeride subnet (192.168.10.x) → gateway patterns - Integrate aiwanbal/SmartAiBalancer state as primary data source when available (fresh <120s); fall back to self-collected ping metrics - Add carrier detection: AT&T for fiber gateways, Eyeride for cellular - Add run_speedtest() with speedtest-cli/iperf3/curl download fallback - Extract jitter (mdev) from ping output for richer metrics - Consistent canonical GL format: modem_0001=cellular, wan=ethernet/fiber Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-23 02:29:49 +00:00
kitadmin	8dba04a1d0	fix: auto-detect WAN roles — cellular vs fiber - Detect Eyeride cellular interface by checking 192.168.10.x subnet - Map correctly: ethernet/fiber → wan, Eyeride 5G → modem_0001 - Add carrier detection: AT&T for fiber gateways, Eyeride for cellular - Fix sel_primary: fiber is active by default unless cellular route exists - Fixes console showing 'on cellular' when actually on AT&T fiber Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-23 02:19:18 +00:00
kitadmin	58ac96fd3c	fix: prevent double-ping fallback corrupting WAN metrics - sudo ping returns exit 1 on any packet loss, which triggered the \|\| fallback to direct ping, causing duplicate output concatenation - Now check exit code explicitly: only fall back on exit >= 2 (real error) - Fixes loss_pct showing 100100 instead of 100 on failed WANs Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-23 02:10:35 +00:00
kitadmin	91373df27d	fix: sanitize newlines in telemetry output for valid JSON - ipgeo_gps: pipe curl output through tr -d to strip newlines - _ping_iface: pipe printf output through tr -d for newline safety Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-23 01:57:56 +00:00
kitadmin	db04341f7c	feat: unified fleet telemetry — canonical format, GPS/IP geo, WAN health dashboard - Rewrite telemetry-synology.sh: canonical GL format (modem_0001/wan keys), self-contained metrics (no aiwanbal), Eyeride GPS with IP geo fallback - Add /api/fleet-telemetry to hub: joins tunnel status with fleet Postgres - Update dashboard.html: per-device WAN health bars, GPS, signal strength - Fix hub/ingest.sh normalisation: remap old wan1/wan2 → modem_0001/wan - Bump SPK version: 0.1-0001 → 0.5.0-0001 for GL parity Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-23 01:47:02 +00:00
kitadmin	d86a7e49b5	feat: BusyBox-compatible telemetry script for Synology Uses sed instead of grep -P for BusyBox ash compatibility. Writes JSON to temp file to avoid shell escaping issues. Posts to fleet hub ingest at 167.172.237.162:8080. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-22 23:13:57 +00:00
kitadmin	879f97c843	fix: x4078 remote recovery + daemon wait-wedge bug + SPK rebuild - docs/incident-log: mark x4078 recovered remotely via Tailscale (no physical access needed); document the recovery steps and root cause - connect-daemon.sh: remove bare `wait` that wedged the retry loop forever on the setsid'd tailscaled child — once the tunnel failed the daemon could not self-heal until the package was restarted; now the main loop falls through start_tunnel (already blocking+retrying) and restarts the whole cycle cleanly - SPK rebuilt (32839680 bytes) with the daemon fix included - Also documents the two latent lessons: (1) a field router is only inaccessible when ALL three paths fail; (2) always check Tailscale + QuickConnect before assuming a truck roll is required Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-07-22 22:23:53 +00:00
kitadmin	24d8fbd366	fix: revert TUNNEL_LOCAL_SSH_PORT to 2223, fix registry, add incident docs - wizard.sh + connect.conf: TUNNEL_LOCAL_SSH_PORT back to 2223 (Synology SSH port) - port-registry: renamed x6340 → x4662 (matches QuickConnect ID) - port-registry: added MR2200ac mesh satellite note for x4662 - deployment checklist: added kit-connect section, post-deployment rules, incident log, and complete fleet port registry table - memory: added fleet-router-inventory.md with full fleet state - hub README: updated with current status and locations Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-22 21:20:08 +00:00
kitadmin	44566d9563	chore: add built kit-connect SPK for direct download Includes fixes: which-vs-command-v for SRM busybox compat, TUNNEL_LOCAL_SSH_PORT default 22, merged authorized_keys. 32MB SPK for Synology RT2600ac/RT6600ax (ipq806x). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-22 20:22:18 +00:00
				`@@ -0,0 +1 @@`
				`{"sessionId":"a109bdc4-2fd1-49a3-803f-c3c3b4858c99","pid":3141099,"procStart":"375768368","acquiredAt":1784001797642}`
				`@@ -0,0 +1 @@`
				`x�ŽAjÃ0E»Ö)f0òH²¬RB�®ºëÆ£llËÁQ¹}Ü+ôo>ïÃƒÏÛºN0Ø�º‹€%õCÌ:8�ÙEQç]VßöQØ¶ˆÒ%ÅÁYs§]J…¾sž¬Ud`