kit-busrouter/kit-connect/wizard.sh

#!/bin/sh
# wizard.sh — One-button Keylink IT fleet setup for Synology routers.
# Idempotent — safe to run multiple times.
# Usage: wizard.sh [--auto] [--force]
#   --auto   Non-interactive (for postinst / web trigger)
#   --force  Re-register even if already assigned
#
# Compatible: RT2600ac, RT6600ax (all ipq806x SRM routers)

set -e

HUB_HOST="162.243.83.36"
HUB_PORT="8080"
CONF="/etc/kit-connect/connect.conf"
AUTO=0
FORCE=0
[ "$1" = "--auto" ] && AUTO=1
[ "$1" = "--force" ] || [ "$2" = "--force" ] && FORCE=1

banner() {
	echo ""
	echo "  ╔══════════════════════════════════════════╗"
	echo "  ║   KEYLINK IT — Pioneer Bus Fleet Setup  ║"
	echo "  ╚══════════════════════════════════════════╝"
	echo ""
}

step()  { echo "  ▶ $*"; }
ok()    { echo "    ✓ $*"; }
warn()  { echo "    ⚠ $*"; }

banner

# ── Step 1: Detect device ──────────────────────────────────────
step "Detecting device..."
DEVICE_ID=$(cat /etc/busrouter/device-id 2>/dev/null || true)
if [ -z "$DEVICE_ID" ]; then
	DEVICE_ID=$(hostname 2>/dev/null | sed 's/[^a-zA-Z0-9_-]//g' || echo "unknown")
fi
mkdir -p /etc/busrouter
echo "$DEVICE_ID" > /etc/busrouter/device-id
ok "Device ID: ${DEVICE_ID}"

# ── Step 2: Check prerequisites ────────────────────────────────
step "Checking prerequisites..."
for cmd in curl ssh ssh-keygen; do
	which "$cmd" >/dev/null 2>&1 || { echo "    ✗ Missing: $cmd"; exit 1; }
done
ok "All prerequisites found (curl, ssh)"

# ── Step 3: Config file ────────────────────────────────────────
step "Configuring Keylink IT defaults..."
mkdir -p /etc/kit-connect /var/packages/kit-connect/target/var

if [ ! -f "$CONF" ]; then
	# Create from template if available
	if [ -f /var/packages/kit-connect/target/conf/connect.conf ]; then
		cp /var/packages/kit-connect/target/conf/connect.conf "$CONF"
	else
		touch "$CONF"
	fi
fi

# Write Keylink IT defaults
_write() {
	grep -q "^${1}=" "$CONF" 2>/dev/null && sed -i "s|^${1}=.*|${1}=${2}|" "$CONF" || echo "${1}=${2}" >> "$CONF"
}

_write "DEVICE_ID" "$DEVICE_ID"
_write "HUB_HOST" "$HUB_HOST"
_write "HUB_PORT" "$HUB_PORT"
_write "TUNNEL_ENABLE" "1"
_write "TUNNEL_REMOTE_HOST" "$HUB_HOST"
_write "TUNNEL_REMOTE_USER" "node"
_write "TUNNEL_REMOTE_SSH_PORT" "22"
_write "TUNNEL_REMOTE_PORT" "0"   # auto-assign
_write "TUNNEL_LOCAL_SSH_PORT" "2223"
_write "TUNNEL_RETRY_DELAY" "30"
_write "TAILSCALE_ENABLE" "1"
_write "TAILSCALE_AUTH_KEY" "tskey-auth-kJz8wqNVo211CNTRL-GNL5EFjp5aWQcaWPSVn2aW9TNworKUNBV"
_write "TAILSCALE_HOSTNAME" "$DEVICE_ID"
_write "WATCHDOG_INTERVAL" "60"
_write "FORWARD_FAIL_LIMIT" "2"
ok "Config written to ${CONF}"

# ── Step 4: Register with hub ──────────────────────────────────
step "Registering with fleet hub (${HUB_HOST}:${HUB_PORT})..."

resp=$(curl -s --connect-timeout 10 --max-time 15 "http://${HUB_HOST}:${HUB_PORT}/api/register/${DEVICE_ID}" 2>/dev/null) || true

if [ -z "$resp" ]; then
	warn "Hub unreachable — will retry on next daemon start"
	ok "Config saved locally (port will auto-assign when hub is reachable)"
else
	port=$(echo "$resp" | grep -o '"tunnel_port"[[:space:]]*:[[:space:]]*[0-9]*' | grep -o '[0-9]*')
	status=$(echo "$resp" | grep -o '"status"[[:space:]]*:[[:space:]]*"[^"]*"' | cut -d'"' -f4)
	tskey=$(echo "$resp" | grep -o '"tailscale_auth_key"[[:space:]]*:[[:space:]]*"[^"]*"' | cut -d'"' -f4)

	if [ -n "$port" ] && [ "$port" != "0" ]; then
		sed -i "s/^TUNNEL_REMOTE_PORT=.*/TUNNEL_REMOTE_PORT=${port}/" "$CONF" 2>/dev/null
		ok "Hub assigned port ${port} (status: ${status:-ok})"
		echo "$port" > /var/packages/kit-connect/target/var/hub_port
	fi
	if [ -n "$tskey" ]; then
		sed -i "s|^TAILSCALE_AUTH_KEY=.*|TAILSCALE_AUTH_KEY=${tskey}|" "$CONF" 2>/dev/null
		ok "Tailscale key configured"
	fi

	# ── Authorize tunnel key with hub ──────────────────────
	if [ -n "$port" ] && [ "$port" != "0" ] && [ -f /var/packages/kit-connect/target/bin/connect_id_ed25519.pub ]; then
		PUBKEY=$(awk '{print $1" "$2}' /var/packages/kit-connect/target/bin/connect_id_ed25519.pub 2>/dev/null)
		if [ -n "$PUBKEY" ]; then
			curl -s --connect-timeout 10 --max-time 15 \
				-X POST "http://${HUB_HOST}:${HUB_PORT}/api/authorize-key" \
				-H "Content-Type: application/json" \
				-d "{\"device_id\":\"${DEVICE_ID}\",\"pubkey\":\"${PUBKEY}\"}" \
				>/dev/null 2>&1 && ok "Tunnel key authorized (restrict, port ${port})" || true
		fi
	fi
fi

# ── Step 5: Dashboard server ───────────────────────────────────
step "Setting up local dashboard..."
mkdir -p /var/packages/kit-connect/target/www
# Dashboard is served by busybox httpd on port 8089
ok "Dashboard will be available on port 8089"

# ── Step 6: Start services ─────────────────────────────────────
step "Starting kit-connect service..."
if [ -x /var/packages/kit-connect/scripts/start-stop-status ]; then
	/var/packages/kit-connect/scripts/start-stop-status start 2>/dev/null && \
		ok "Service started" || warn "Service start returned non-zero"
fi

# ── Done ───────────────────────────────────────────────────────
ASSIGNED=$(grep '^TUNNEL_REMOTE_PORT=' "$CONF" 2>/dev/null | cut -d= -f2 || echo "pending")
echo ""
echo "  ╔══════════════════════════════════════════╗"
echo "  ║        SETUP COMPLETE                    ║"
echo "  ╠══════════════════════════════════════════╣"
printf "  ║  Device:  %-30s ║\n" "$DEVICE_ID"
printf "  ║  Port:    %-30s ║\n" "$ASSIGNED"
printf "  ║  Hub:     %-30s ║\n" "${HUB_HOST}:${HUB_PORT}"
echo "  ╠══════════════════════════════════════════╣"
echo "  ║  Dashboard: http://${DEVICE_ID}:8089/     ║"
echo "  ╚══════════════════════════════════════════╝"
echo ""

exit 0