kitadmin
68306dcb14
SRM default PATH is /usr/bin:/bin:/usr/sbin:/sbin:/usr/syno/bin — /usr/local/bin is NOT included. 'command -v /usr/local/bin/tailscaled' fails on busybox ash even when the file exists and is executable. Replaced with '[ ! -x "$BIN" ]' which is always reliable for absolute paths. Found during x5925 deployment testing. Daemon logged 'binary not found' despite the files being present at /usr/local/bin/tailscale[d]. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
kit-busrouter
Configuration and operational notes for the bus-fleet edge routers.
Hardware
GL.iNet GL-XE3000 (5G "Puli") running OpenWrt. LAN address 192.168.8.1, login root.
Management access
Routers are managed out-of-band over a WireGuard tunnel to the busfleet hub. Each router dials the hub and mgmt SSH is allowed inbound over the tunnel only — never exposed on the WAN.
| Item | Value |
|---|---|
| WG client interface / firewall zone | wgclient1 (proto=wgclient) |
| Router tunnel IP | 10.88.0.2/32 |
| Hub tunnel IP | 10.88.0.1 |
| Hub endpoint | 167.172.237.162:51820 (UDP) |
| Tunnel subnet | 10.88.0.0/24 |
| Inbound mgmt SSH rule | Allow-WG-mgmt-SSH — tcp/22 from 10.88.0.0/24, src zone wgclient1 |
| Hub jump key | busfleet-hub-jump (ed25519) in /etc/dropbear/authorized_keys, perms 600 |
The hub reaches a router with:
ssh -J busfleet-hub-jump root@10.88.0.2 # over the established tunnel
Docs
- docs/mgmt-tunnel-ssh.md — provisioning and troubleshooting inbound mgmt SSH over the WireGuard tunnel.